​Not long ago, I reviewed the Airport Security V3.0 rolling camera case from Think Tank. I couldn’t sing its praises loud enough.

Well, the TakeOff V2.0 may unseat the Security as my favorite roller, and here’s why. (For reasons why you should use a roller for your camera gear in the first place, I direct you to that earlier review.)
 
At the outset we should point out that all of Think Tank’s Airport-series rollers are what we’d consider “soft-sided” luggage. That means it's fabric-covered and pliable yet quite rigid.
​

​Airport TakeOff V2.0 vs the Original Airport TakeOff
On the surface, they appear to be very similar. You’d be hard pressed to tell the difference. However, there are a few noteworthy design changes, from what I can discern in the specifications.
 
To begin, the new bag uses a 1680D nylon shell, which is better quality, higher density, and more abrasion-resistant than the 420D used in the original. Second, whereas both employ user-replaceable in-line skate wheels, V2 uses “high performance, 80mm super-quiet wheels with sealed bearings.” Not having used the original, I can’t speak to a quantifiable difference, but I can say that the new wheels are smooth-rolling and super quiet. The Airport Security uses the same wheels, so there was no need to put them through the same tests. Suffice to say, they pass muster on carpet, cracked pavement, and grass.
 
Aside from that, the pocket that was originally inside the cover flap has moved to the outside, for faster access, except that it’s fully opaque nylon, not see-through plastic. There are also some cosmetic differences and the included tethered lock has been moved to the side, underneath the side padded handle.
​

​Airport TakeOff V2.0 vs Airport Security V3.0
The TakeOff has a smaller profile than the Security, so it should be a better fit in the overhead on smaller aircraft. That said, you should always check airline allowances before packing your gear and leaving for the airport.
 
The Security is designed to serve as the name implies. The primary lock is built into the case, with both zipper pulls (the metal tabs) locking in place inside the combination lock – it’s an ingenious design! The tethered lock, however, is a standard combination lock and removable from the tether. Both are TSA-compliant (meaning TSA can easily unlock them if needed).
 
The TakeOff features only a tethered combination lock, also TSA-compliant, but this lock is permanently attached to the tether. And the tether is much shorter here than on the other bag, if that matters. Also, as mentioned, the tether is found on the side of the bag, in contrast to the top-loading tether on the Security (not sure if that really makes a difference from a practical standpoint). The zippers to the TakeOff’s camera section are interlocking to accept the TSA combination lock.
 
The front pockets on the two rollers are different, yet similar in some ways. Both will hold a laptop plus tablet. The laptop sleeve on the TakeOff is a smidge larger and appears to have thicker padding in front. The TakeOff will hold my 17” Gateway with protruding battery attached. This laptop is quite thick. The fit was snug, and removing the battery would have been a prudent move. The TakeOff features an organizer pocket, whereas, oddly, this feature is missing on the other roller.

The biggest difference between the two cases is in how you access the outside compartments. On the Security, everything but the outer mesh front pocket, is zippered, with interlocking zippers – hence, lockable. The TakeOff lacks the large outer mesh pocket, and only the organizer pocket is zippered – but with no way to secure it. The laptop/tablet sleeves are accessible via a snap-closure mechanism – not at all difficult to get into when your back is turned. So you wouldn't want to leave the TakeOff with a stranger while you head to the restroom or while you step away for a quick cup of java.

An even greater overriding concern for some of you: If you work with pro-grip DSLRs, then you'll definitely choose the deeper Security over the TakeOff. A point that should not be overlooked.
 
The telescoping handle is fully exposed on the Security, whereas on the TakeOff it is hidden beneath a zippered flap, and for good reason. What really sets the TakeOff apart from the Security and other Think Tank Airport rollers is the built-in backpack harness.

​Why a Backpack Harness?
Despite the fact that Think Tank does a really nice job with its padded handles, making them ultra-comfy and ultra-strong, there are times when you want to move more quickly and with better balance over uneven, perhaps gravelly, rock-strewn, or muddy terrain, and hand-carrying just won’t cut it.
 
Carrying a roller by the handle makes you kind of wobbly. Besides, you may need your hands free to carry something else or to help you negotiate stairs or rough terrain. Enter the backpack harness.
 
Unlike the traditional backpack harness found on rollers equipped with these straps, where you first have to attach the harness or go through some lengthy process of digging them out, using the harness on the TakeOff couldn’t be easier. Unzip a flap on the back, and voila! You’ve unveiled the backpack straps. They slide out and back in effortlessly.
 
The first thing you’ll notice is that the flap leading to the harness secures to the bottom of the case and out of the way via hook-and-loop material, popularly known as Velcro. What you will notice is that these shoulder straps don’t extend all the way down to the bottom edge of the case – at least not from the outside. That means there’s no waist belt, which is unnecessary in this kind of arrangement.  There is, however, a sternum (chest) strap to help secure the bag so it doesn’t shift weight as you’re trekking over rocky areas.
 
Granted, this is a heavier setup than a traditional soft-sided backpack alone without wheels or cart handle. But you won’t be going on long hikes. You’re just donning the harness to negotiate a short stretch of difficult terrain, or to climb the stairs. (Advisory: never drag the case up stairs or lift it by the telescoping handle. Always hand-carry it in such instances, or use the backpack harness.)

​In Use
Rollers traditionally have one failing. To allow for the wheelbase and telescoping handle, sections of the interior are raised, leaving what we might describe as wells or channels. You can simply work around that  without it hampering you in the least. I arranged my gear in minutes.

The interior lets you stash two bodies sans pro-grip with attached lenses and a whole slew of additional glass and one or two shoe-mounts besides. There are more than enough padded dividers and many of these are hook-and-loop compatible, letting you configure the interior to your heart’s content.
 
As for the backpack straps… Well, keep in mind this is not a traditional backpack. Owing to the constricted way the straps extend outside the bag (not as loose as the traditional harness), the straps did pinch a bit under the arms, but not to the point of unbearable discomfort. You should try it out for yourself, as all body types are different. Remember: these straps are just a temporary means of traversing terrain that would prove difficult for wheeled luggage. In the main, wheeling this case along is just a dream.

​Materials (per Think Tank Photo)
Exterior: For superior water-resistance, all exterior fabric has a durable water repellent (DWR) coating, plus underside of fabric has a polyurethane coating. The roller bags are also constructed with 1680D ballistic nylon, YKK RC Fuse (abrasion-resistant) zippers, custom designed extra tall skid plates, high performance 80mm super quiet wheels with sealed bearings, SpanKodra front pocket, rubberized laminate reinforcement, nylon webbing, and 3-ply bonded nylon thread.
 
Interior: 210D silver-toned nylon, polyurethane backed Velex liner and dividers, 2x polyurethane coated nylon 210T seam-sealed rain cover, closed-cell foam and reinforced

Specifications (per Think Tank Photo)
Internal Dimensions: 13” W x 18.5” H x 5.3 – 6.8” D (33 x 47 x 13–17 cm)
Exterior Dimensions: 14” W x 21” H x 8” D (35.5 x 53 x 22 cm)
Laptop Pocket: 11.4” W x 16.3” H x 1.4” D (29 x 41.5 x 3.6 cm)
Tablet Pocket: 9.8” W x 9.4” H x 0.8” D (25 x 24 x 2 cm)
Weight: 7.0–8.7 lbs. (3.2–3.9 kg) depending on accessories used
​
Where can I get more info/order this product?
Think Tank Photo
 
Manufacturer:
Think Tank Photo

How much is it?
$369.75

​They may seem bulky, but rolling cases are a necessary evil for the traveling photographer and location shooter. While I prefer to carry my gear in a backpack, that doesn’t work for everyone, in every situation. And even I find myself switching to a roller when needed. Think Tank’s Airport Security V3.0 would be a top contender in such situations.
 
Rollers vs. Everything Else
I like to be flexible, and I prefer my portage gear to bend to the occasion. When I moved from New York to Chicagoland, roller cases saved the day. When I later moved again, from burb to burb, I used my rollers to move glassware (a padded case is better than those boxes movers sell you). I brought the gear over to the new digs in my photo packs, then transferred the gear to the rollers for storage. Rollers let you see everything when you open the lid. That’s the beauty of a roller. They’re also ideal for lighting equipment.
 
Of course you could choose a shoulder bag. However, I’ve stopped using large shoulder bags a long time ago, finding them too unwieldy and uncomfortable. They cause some photographers to become stoop-shouldered after years of use. And I don’t see shoulder bags as being an easy fit on an airplane. That said, a shoulder bag is the easiest means of carrying and accessing gear on the fly, especially if you’re hesitant to set a bag down someplace, or need to work quickly. And, yes, Think Tank has lots of shoulder bags as well. But we’re getting off track.
 
Once you step out of the vehicle with your luggage at the airport, a roller affords you the comfort of making your way from the front door of the terminal all the way to the gate without feeling any strain. But, sadly, many rollers are not very quiet or designed with travel in mind. Enter the latest iteration of Think Tank Photo’s definitive airline-friendly roller: Airport Security V3.0. Airport Security was designed primarily for domestic air travel. For international travel, Think Tank also introduced the smaller Airport International V3.0. And if you’re thinking commuter jets and regional airlines, Think Tank also debuted the more modestly sized Airport Advantage.

​Inside the Airport Security V3.0…
Any way you slice it – but please don’t slice it; it’s luggage, not pizza, the Airport Security V3.0 was designed with the photographer in mind. It’s fully modular and fully padded on the inside. In fact, Think Tank throws in a number of extra dividers so you have total flexibility in how you configure the interior.
 
As it comes to you, the bag is divided into three long channels, with numerous dividers running up and down each lane of camera traffic. In fact, you can stow two DSLR bodies with attached lenses, and, provided these lenses are not overly huge, you’ll have plenty of room for the rest of your camera gear. On a whim, I decided to see if my compact Photogenic monolight, standard reflector, and ION inverter would fit, along with cables and cords, a flash meter, plus some extras—and it all fit comfortably.
 
Then I switched it back to a camera configuration. Let me tell you, it takes a lot longer to restore an original configuration (or something approaching the original) than to reconfigure it.
 
There are also several see-through pockets inside the lid. And unlike a hardshell case, which provides eggcrate foam inside the lid, soft cases don’t have that luxury. So securing loose items is that much more important. That said, I haven’t found or heard anything bouncing around inside. More to the point, the many flexible dividers ensure a snug fit for everything inside this case.
 
…And Outside
Speaking of the lid. Frankly, this is the only feature I’m not thrilled with. It opens lengthwise, vertically – not like a typical suitcase. That’s a bit cumbersome, seeming to require more ground space when fully opened. Unless you lean the lid against something conveniently nearby, such as a chair or bench.
 
Technically, this is a hybrid design, neither hard-shell nor soft-sided. The walls are fairly rigid, reinforced, protected by a durable, water-resistant nylon shell on the outside. The handles are secure, but again nylon and heavily padded, and very comfy. There’s one handle on top, another on the front. There are also two grab straps (opposite the handles) to help you maneuver the case in the overhead, or retrieve it. Never carry the case by these grab straps – that’s not their purpose.
 
Outside Pockets
There’s a small stretch pocket on the side. That’s not really designed for a water bottle, though it could hold a small one. The real purpose for this pocket is to secure a tripod, using the included straps.
 
There’s also a large stretch pocket on the front, where you could keep that water bottle. More importantly, behind this stretch pocket is a large pocket. Here you’ll find organizer pockets, a padded tablet sleeve, and a much larger padded sleeve for a laptop.
 
There’s one more little pocket on top, leading to a pleasant surprise.
 
Security Is a Top Priority
That little pocket? It holds a reinforced cable tether with TSA-compliant combination lock, so you can secure the case to any immovable object in your hotel room or wherever you happen to be. (Always exercise caution before leaving gear unattended. Better yet, don’t leave it unattended.)
 
But what’s to stop someone from simply opening the case? To show you how well conceived this case is, just look at the two main zippers. They’re each tucked into a TSA-approved locking mechanism, which is governed by a combination lock. I don’t know who came up with this idea originally, but it’s ingenious! Even the laptop pocket uses interlocking zipper pulls. You’ll have to buy a separate lock for this, and make sure it fits the tiny aperture.
 
One more nice security feature: each case comes with a serial number. Take a picture of it with your phone and keep it handy for a worst-case scenario – one you never hope to encounter.
 
In Use
What’s a roller without a good set of wheels? First, the wheels and related components are all user-replaceable.
 
Now, the wheels themselves are quiet as the proverbial mouse. I wheeled this baby over carpeting, tile, cracked and bumpy pavement, cracked asphalt, and grass. It was quieter than speaking in hushed tones at the library. And it handled all impediments with aplomb. Yes, grass did slow it down a bit, but not by much.
 
The telescoping handle was comfy enough and remained extended despite leaning down on it. I didn’t find the case straining to twist and turn at every opportunity when using the handle fully extended. I should also add that the handle reached a comfortable height. (Advisory: never drag the case up stairs or lift it by the telescoping handle. Always hand-carry it in such instances.)